Subscribe Now

Trending News

Blog Post

How to calibrate ps vita analog sticks?
How To

How to calibrate ps vita analog sticks?

How to calibrate ps vita analog sticks?

Many PS Vita users have lately reported that when they release the pressure on the left analog stick, the component controlled by it travels upwards until the stick is pressed again.

However, it’s fairly rare to run across problems like malfunctioning controllers and analog stick drift, which many users have experienced. The solutions to this problem are provided below; check them out and get your PS Vita back up and running so you can play your games without interruption.

Possible Reasons behind the PS Vita analog stick issue

Before you can fix the problem, you must first understand what is causing it. There are various factors that might cause this problem, but some of the most prevalent ones are given here.

Defective controller hardware

One of the most likely causes of the PS Vita issue is the controller’s damaged hardware, which frequently causes the analog stick to drift. However, such damages are difficult to repair completely; the damaged parts can either be repaired by a technical specialist or replaced.

Natural fluctuations

The analog stick drift might be caused by the controller’s natural variations. It’s possible that it became slightly out of alignment with the axis of origin while in use.

Ways to prevent PS Vita analog drift

One of the best methods to keep your controller safe is to keep it in a box or somewhere secure. Keeping your controller somewhere else might help us with the issue that isn’t related to the software by preventing it from becoming contaminated by dirt and dust.

If there is a problem with the hardware, however, you should read the rest of the article to help you solve your problem.

Tweaks in the deadzone

The software controls an area near the center of each analog stick on each controller. In most games, you can alter the settings here to reduce the deadzone and the chances of having analog stick drift.

The majority of games have a smaller range of deadzone; however, due to the default settings, this can sometimes result in analog drift. However, changing the deadzone is easier to solve the problem. In order to do so, you should follow the instructions outlined below.

  1. Navigate to the game’s settings.
  2. The deadzone settings option can be found in the settings menu.
  3. Adjust the deadzone setting by slightly increasing its value.
  4. After you’ve made the changes, be sure you’ve saved them.
  5. Check to see if the problem has been resolved; if it hasn’t, repeat the process.

Calibrate ps vita analog sticks

If the analog stick drift hasn’t been corrected yet, it’s possible that the issue is due to faulty hardware, in which case you should follow the steps outlined here.

Compressed air

Cleaning your controller on a regular basis will help you with a variety of issues besides analog stick drift. It will prevent any further buildup of dirt and debris along with the spaces between the buttons, allowing your controller to last longer.

You can use an electric air duster as an alternative to compressed air. If you’re using the electric duster, make sure the controller is turned off. This is critical for the controller’s safety and prevents it from suffering further harm.

  1. Unplug and switch off the controller before moving on to the other steps. Press the PS button for 20-30 seconds.
  2. Slightly move the left analog stick and use the compressed air onto it.
  3. Repeat it on the right analog stick as well.
  4. Move the analog sticks to the sides 2-3 times to ensure that the dirt or debris is removed completely.

If that doesn’t work, you can try removing the controller with a screwdriver and blowing compressed air into the open controller; this can be a little tough, but it will save you money on a new controller.

Using Isopropyl alcohol

Cleaning your equipment with isopropyl alcohol can be more effective. The dust and material that collects in the controller pull the stick, causing it to move in unexpected ways.

Using a few drops of alcohol, twist the joystick to ensure that it is equally distributed across the surface, removing the dust and allowing the stick to travel freely.

Try replacing it with a new one

If your controller is still under warranty, you can contact customer service to have it repaired or replaced. If it isn’t covered by the manufacturer’s warranty, you should get a new one.

There are a plethora of options available on the internet that will work with your PS Vita, but before you choose one, make sure it is dependable and durable, and read the reviews to ensure you get the best one possible and get your game up and running in no time.

Author’s Bio

Author is a tech-savvy and owner of Vulomedia. At her blog, she shares various tips and tricks related to fix any tech related queries in an easy way.

Related posts